Behringer EURORACK UB1202 Power Supply

Behringer EURORACK UB1202 Power Supply

Power supply using dual output 15v 1 ampere and 3 Pin Miniature Microphone Connector (Male/Female Pair)

Additional information…

To connect an external effects unit to the UB1202, follow these steps:

  1. Use a cable to connect from the FX SEND port to the input of the effect processor.
  2. Then connect a cable from the output of the effects device to one of the LINE ports. If the device has stereo outputs, you can use both stereo line inputs (5/6, 7/8, etc.)
  3. Adjust the the effects processor to 100% wet.
  4. Turn the FX knob on the channel you are plugged into all the way down (to avoid a feedback loop).

Shared: TV Technicians Forum & SPEAKER BOX PLAN PILIPINAS

Leave a Reply